Topsky Tianlong Conquest D2 (Tianlong Conquest D2)

Topsky Tianlong Conquest D2 (Tianlong Conquest D2)

It is commonly cataloged as part of Topsky’s Tianlong Conquest industrial response family and is associated with the RXR-MC80BD class of tracked “fire extinguishing + scouting” robots used for petrochemical firefighting, hazardous gas incidents, and high-smoke rescue scenarios.

The D2 variant is marketed as a robotics platform intended to improve firefighter safety by enabling operators to perform standoff suppression and real-time reconnaissance in environments with flammable vapors, toxic smoke, uncertain structural integrity, or high radiant heat. In typical deployments, this category of firefighting robot supports incident commanders by providing stable mobility, live video, and high-flow water/foam discharge capability while keeping personnel at a safer distance from the hazard zone.

Design and Features

Explosion-proof firefighting concept for industrial hazard zones

Topsky positions the RXR-MC80BD explosion-proof firefighting and scouting robot class for use in explosive environments, including petrochemical refining, oil and fuel gas storage, and chemical manufacturing, storage, and transportation sites.
This positioning is directly aligned with the operational intent of Tianlong Conquest D2: supporting remote response where ignition risk and unknown atmospheres make traditional close-range suppression dangerous.

Tracked chassis and high-temperature track design

Tianlong Conquest D2 is built around a tracked unmanned ground vehicle (UGV) chassis optimized for traction on wet pavement, foam-covered floors, uneven industrial terrain, and debris. Topsky’s RXR-MC80BD technical listings describe a high-temperature resistant track and emphasize off-road capability for rescue scenes that are not smooth, dry, or predictable.

High-flow water/foam fire cannon with adjustable aiming

A defining capability of the RXR-MC80BD platform is its high-flow fire cannon designed for long-range standoff suppression. Topsky lists a maximum spray angle and long-range water/foam performance suitable for industrial-scale cooling and knockdown operations.
Key published performance parameters for the RXR-MC80BD fire cannon include:

• Water range: ~80 m

• Foam range: ~73.2 m

• Flow: ~80 L/s (≈4800 L/min)

• Working pressure: 0–1.2 MPa

• Horizontal aiming: −90° to +90°

This specification profile supports multiple industrial firefighting roles: cooling exposed tanks or process equipment, suppressing flames at a distance, and maintaining safer standoff in high-radiation zones.

DN80 dual water inlet for industrial supply compatibility

Topsky lists the RXR-MC80BD with a dual DN80 water inlet (2 × DN80), a configuration relevant to many industrial firefighting systems where high-volume water supply and compatibility with common hose standards is required.

Hose towing and forward logistics support

In addition to extinguishing, the Tianlong Conquest D2 category is built to help solve one of the most demanding tasks on a large fireground: advancing charged hose lines. The RXR-MC80BD specification set includes traction force and a chassis intended for pulling loads across wet or obstructed surfaces.
While towing distance metrics may differ across catalogs, this capability is generally valued in petrochemical and tunnel incidents where crews need greater reach without exposing personnel to the highest-risk area.

Long-distance wireless control for safer standoff operations

Topsky publishes a wireless control distance of ~1110 m for the RXR-MC80BD platform, enabling the robot to work deep into hazardous zones while the operator remains well outside the most dangerous area.
This operational concept is critical for incidents involving flammable vapor clouds, pressurized leaks, or dense smoke where visibility and survivability can degrade rapidly.

High sealing protection for wet, foam-heavy response

In Topsky’s RXR-MC80BD technical listing, the robot is specified at IP68 protection, indicating a strong resistance to water ingress—a major advantage during sustained water/foam operations, washdown procedures, and heavy spray environments.

Technology and Specifications

Mobility and chassis performance

Topsky lists the following RXR-MC80BD robot parameters:

• Weight: ~529 kg

• Dimensions: 1305 × 800 × 1065 mm

• Traction force: ~3800 N

• Speed: 0–1.81 m/s

• Climb ability / stability angle: ~40°

• Obstacle crossing: ~220 mm

• Wading depth: ~500 mm

• Work time: ~2–6 hours (catalog value)

• Charging time: ~6–8 hours (catalog value)

• Wireless control distance: ~1110 m

• Protection rating: IP68

Fire cannon specifications

Topsky lists the following parameters:

• Water inlet: 2 × DN80

• Flow: ~80 L/s water, ~80 L/s foam

• Range: ~80 m water / ~73.2 m foam

• Max spray angle: ~120°

• Horizontal aiming: −90° to +90°

• Working pressure: 0–1.2 MPa

Applications and Use Cases

Petrochemical refining and fuel storage firefighting

Topsky specifically describes the RXR-MC80BD explosion-proof firefighting robot category as suitable for petrochemical refining and oil/fuel gas storage environments, where fire dynamics and explosion risks can escalate quickly.
In such sites, Tianlong Conquest D2 is typically used for standoff cooling and suppression to help reduce BLEVE risk (boiling liquid expanding vapor explosions) and to control heat exposure on critical infrastructure.

Chemical manufacturing and hazardous-material emergencies

Chemical plants may involve unknown mixtures of vapors, toxic combustion products, and limited access routes. Explosion-proof firefighting robots are often deployed to perform initial reconnaissance, apply suppression at distance, and keep response teams away from unpredictable process hazards.

Dense smoke, low visibility, and high-temperature incidents

The broader RXR-MC80BD platform is marketed for environments with smoke and other dangerous disaster conditions. Robots of this class help reduce the need for human entry into blind conditions during early operations, particularly when visibility is near-zero and collapse risk cannot be ruled out.

Industrial yards and long-corridor facilities

Facilities such as terminals, depots, and long industrial corridors may require fast relocation and long-range discharge. With up to ~1.81 m/s speed and ~80 m suppression range, Tianlong Conquest D2 can be used to extend firefighting reach across large areas while maintaining safer standoff.

Advantages / Benefits

Improved responder safety through remote-first operations

The primary benefit of Tianlong Conquest D2 is reducing firefighter exposure to heat, smoke, and explosion risk by enabling suppression and scouting from a distance. Explosion-proof firefighting robot categories are explicitly presented as tools that improve rescue safety and reduce casualties in high-risk missions.

High-flow suppression capability for meaningful industrial impact

A published ~80 L/s fire cannon with substantial range is intended for industrial-scale cooling and knockdown, where smaller streams may be insufficient for rapid hazard control.

Strong mobility and environmental robustness

With tracked mobility, 40° stability angle, 500 mm wading depth, and IP68 sealing, the platform is designed for water-heavy, foam-heavy, debris-prone response environments where electronics and drive systems face constant stress.

Long-distance control for standoff command

A published ~1110 m wireless control distance supports safer operational layouts, allowing incident teams to establish a remote operating position while the robot advances into hazardous zones.

FAQ Section

What is Topsky Tianlong Conquest D2?

Topsky Tianlong Conquest D2 is an explosion-proof firefighting and reconnaissance robot commonly associated with the RXR-MC80BD tracked platform, designed for hazardous industrial fire response and remote standoff suppression.

How does Tianlong Conquest D2 work?

It is operated via long-distance wireless remote control and delivers water or foam using a high-flow fire cannon. The tracked chassis enables it to move through wet, smoky, or debris-laden environments to apply suppression while responders remain at safer standoff distance.

Why is Tianlong Conquest D2 important?

It helps reduce the risk to firefighters in explosive industrial environments—such as petrochemical sites—by supporting remote-first firefighting and reconnaissance where smoke, heat, and hazardous atmospheres can rapidly become life-threatening.

What are the benefits of Tianlong Conquest D2?

Key benefits include explosion-proof firefighting design intent, high-flow ~80 L/s water/foam suppression, ~80 m water range, tracked mobility, IP68 sealing, and ~1110 m wireless control distance for safer operations.

Summary

Topsky Tianlong Conquest D2 is an explosion-proof, tracked firefighting and reconnaissance robot associated with the RXR-MC80BD platform class, designed to improve safety and operational effectiveness in hazardous industrial incidents. With published specifications including ~80 L/s water/foam flow, ~80 m water range, 2 × DN80 water inlet, IP68 protection, up to ~1.81 m/s speed, and ~1110 m wireless control distance, Tianlong Conquest D2 is positioned as a standoff suppression and mobility tool for petrochemical, fuel storage, and high-smoke emergency response scenarios.