Topsky Tianlong Conquest D10 (Tianlong Conquest D10)

Topsky Tianlong Conquest D10 (Tianlong Conquest D10)

The robot is marketed for scenarios where heat, smoke, toxic gases, and potential explosion risk can limit safe human access—such as petrochemical facilities, chemical plants, fuel storage sites, and other incident scenes requiring standoff firefighting and fast reconnaissance.

Within Topsky’s broader portfolio of emergency robotics, the Tianlong Conquest D10 aligns with a modern class of tracked fire robots that typically combine wireless teleoperation, long-range water/foam suppression, and sensor-based situational awareness (often including gas detection and multi-camera video). This approach is intended to reduce responder exposure while improving command visibility and speed of action in volatile environments.

Design and Features

Explosion-proof safety and sealed protection

A defining feature of the Tianlong Conquest D10 is its suitability for hazardous atmospheres. Product documentation describes the robot as having a high explosion-proof grade (ExdIIB+H2T6Gb) and a high protection level (IP67).
These properties are operationally important for firefighting robots used in industrial zones where explosive vapors or fine particulates may be present, and where water spray, foam, and debris can stress electronics and drive systems.

Topsky’s own explosion-proof firefighting robot product literature emphasizes that explosion-proof platforms are designed and certified for fire extinguishing and reconnaissance in explosive environments, including petrochemical refining and oil/fuel gas storage applications.

Tracked mobility and “rapid response” speed

The Tianlong Conquest D10 uses a compact tracked chassis, designed for stable movement over wet surfaces, foam-covered floors, uneven industrial terrain, and debris. Speed is strongly emphasized in its published description: the D10 is listed as reaching 5.51 km/h, presented as significantly faster than an “industry standard” baseline for comparable platforms.

This speed profile supports a common industrial firefighting requirement: the ability to move quickly across large sites (tank farms, terminals, long corridors, or open yards) while maintaining a safe standoff distance from heat and smoke.

Long-range water cannon for standoff suppression

Tianlong Conquest D10 is described as equipped with a long-range water cannon, supporting remote suppression at distances that help keep personnel farther from radiant heat and blast risk.
In Topsky’s explosion-proof firefighting robot category, remote operation of a monitor (including rotation and pitch control and switching between water and foam) is presented as a core feature of modern deployment models.

Hose transport and incident logistics support

Beyond extinguishing, industrial robots are frequently used to move equipment forward under hazardous conditions. Tianlong Conquest D10 is described as able to carry fire hose reconnaissance and support transportation of rescue equipment and materials (such as water hoses).
In fireground practice, this type of capability can help extend suppression reach without requiring crews to manually advance charged lines into dangerous areas.

Toxic and harmful gas detection

The D10 is marketed as supporting “many types” of toxic and harmful gas detection, helping responders evaluate hazard zones before and during suppression.
Topsky’s explosion-proof robot overview describes an integrated gas detection platform designed to measure gases and environmental parameters, reflecting the increasing importance of sensor-driven decisions in industrial incidents.

Cloud connectivity and remote command awareness

A prominent feature of Tianlong Conquest D10 is its ability to connect to a robot networked cloud platform for real-time operational status, including position, battery level, audio, video, and gas environment detection data.
This cloud-style telemetry supports incident command workflows where multiple stakeholders (safety officers, supervisors, and control room teams) may need visibility into robot status and hazards during complex operations.

Technology and Specifications

Note: Specifications may vary by configuration and installed sensor options. The following figures reflect the published Tianlong Conquest D10 specification set.

Core physical and mobility specifications

Tianlong Conquest D10 is published with the following parameters:

• Dimensions: 1320 mm × 850 mm × 1150 mm

• Weight: ≤ 366 kg

• Traction force: ≥ 2800 N

• Dragging distance: ≥ 80 m (dragging 2 × DN80 full water hoses)

• Maximum linear speed: ≥ 1.81 m/s (≈ 5.51 km/h)

• Straight deviation: ≤ 0.42%

• Climbing ability: ≥ 83.9% (≈ 40°)

• Obstacle crossing height: ≥ 220 mm

• Wading depth: ≥ 500 mm

These specifications indicate a design optimized for industrial mobility, including shallow wading, obstacle crossing, and controlled movement under load when towing charged hose lines.

Environmental protection and hazardous-area suitability

• Explosion-proof grade: ExdIIB+H2T6Gb

• Ingress protection rating: IP67

In Topsky’s explosion-proof robot literature, explosion-proof certification and sealing protection (IP67/IP68 in related models) are treated as essential for performance in wet, smoky, and flammable-vapor environments typical of industrial emergencies.

Applications and Use Cases

Petrochemical refining and fuel storage incidents

Tianlong Conquest D10’s explosion-proof positioning and gas detection features align strongly with high-risk environments like petrochemical facilities and fuel storage depots, where vapor ignition risk and radiant heat can restrict manual operations.

Chemical manufacturing, storage, and transportation emergencies

Chemical incidents often require reconnaissance-first decision-making due to uncertain atmospheres. A robot that can provide video/audio monitoring and gas detection data can support safer approach planning and remote suppression, especially in large sites where hazardous zones evolve quickly.

High-smoke and limited-visibility industrial fires

Dense smoke environments—particularly in enclosed or semi-enclosed industrial areas—can obscure hazards and conceal structural damage. Cloud-linked telemetry and on-scene sensing help incident teams understand conditions without committing personnel to blind entry.

Hose-line advancement and exposure reduction

A key operational advantage of the D10 is its published ability to drag two DN80 full water hoses for at least 80 meters, supporting suppression line advancement while keeping firefighters farther back from immediate hazards.
This type of capability is frequently prioritized in large fires because it reduces physical strain and exposure time at the hazard boundary.

Advantages / Benefits

Improved responder safety in explosive-risk environments

Explosion-proof construction and IP67 sealing help reduce operational risk when firefighting occurs near flammable vapors, toxic gases, or volatile industrial processes, where accidental ignition sources and water ingress can threaten equipment integrity.

Fast travel speed for large site coverage

With a published maximum speed of 5.51 km/h (1.81 m/s), Tianlong Conquest D10 is positioned as a rapid-response robot for sprawling industrial facilities, helping shorten time-to-water and time-to-recon.

Practical logistics utility through DN80 hose towing

The ability to tow two DN80 charged hoses for ≥80 m, supported by ≥2800 N traction, gives the D10 a dual function as both a suppression platform and a logistics tool in complex incidents.

Better command awareness through cloud telemetry

By sending data such as position, battery, audio/video, and gas readings to a networked platform, the D10 supports coordinated operations where multiple decision makers may need synchronized real-time information.

FAQ Section

What is Topsky Tianlong Conquest D10?

Topsky Tianlong Conquest D10 is an explosion-proof tracked firefighting robot designed for remote fire suppression, hazardous gas detection, and real-time reconnaissance in high-risk industrial environments.

How does Tianlong Conquest D10 work?

The robot is remotely operated and can transmit operational status such as position, battery level, audio/video, and gas environment readings through a networked cloud platform. It can tow hose lines, move into hazardous zones, and provide standoff firefighting using its long-range water cannon.

Why is Tianlong Conquest D10 important?

It helps reduce firefighter exposure to explosion risk, toxic gases, and severe heat by enabling reconnaissance and suppression tasks to be performed remotely while delivering real-time hazard data to command teams.

What are the benefits of Tianlong Conquest D10?

Key benefits include ExdIIB+H2T6Gb explosion-proof protection, IP67 sealing, fast travel speed (up to 5.51 km/h), DN80 hose dragging (≥80 m), strong mobility (wading depth ≥500 mm), and cloud-based telemetry for real-time operations.

Summary

Topsky Tianlong Conquest D10 is an explosion-proof, IP67-rated tracked firefighting robot engineered for high-risk industrial incidents requiring remote suppression, rapid reconnaissance, and hazard intelligence. With published specifications including 1320 × 850 × 1150 mm size, ≤366 kg weight, ≥2800 N traction, ≥80 m DN80 hose dragging, and a maximum speed of 1.81 m/s (5.51 km/h)—along with cloud-linked audio/video and gas environment monitoring—the D10 is designed to extend operational reach and improve responder safety in volatile emergency conditions.